DPA d:dicate DP-4015C Compact Wide Cardioid Mic
DPA Microphones DP-4015C
D:Dicate Series
DPA Microphones DP-4015C
D:Dicate Series
This mic is the perfect fill-in between an omnidirectional and a directional microphone.
The off-axis characteristics of this mic are totally linear, a unique quality when it comes to authentic sound reproduction. Any leakage that occurs from off-axis sound sources is still a faithful reproduction of these sounds, just softly attenuated.
Features
TOTALLY LINEAR OFF-AXIS CHARACTERISTICS
· Low profile – wide pickup area
· Natural reproduction
· Directional ambience pickup
· Exceptional for vocals
· Modular flexibility
Technical Specifications
|
Brands |
DPA Microphones |
|
Microphone Type |
Pencil Microphones |
|
Series |
d:dicate |
SPECIFICATIONS
|
Directional pattern: |
Wide Cardioid |
|
Principle of operation: |
Pressure Gradient |
|
Cartridge Type: |
Pre-polarized condenser |
|
Frequency range: |
20 Hz to 20 kHz |
|
Frequency range, ± 2 dB: |
40 Hz to 20 kHz |
|
Sensitivity, nominal, ± 2 dB at 1 kHz: |
10 mV/Pa; -40 dB re. 1 V/Pa |
|
Equivalent noise level, A-weighted: |
Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A)) |
|
Equivalent noise level, ITU-R BS.468-4: |
Typ. 25 dB |
|
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 76 dB(A) |
|
Total Harmonic Distortion (THD) at 1 kHz: |
< 1 % up to 139 dB SPL peak |
|
Minimum load impedance: |
2 kohm |
|
Dynamic range: |
Typ. 121dB |
|
Max. SPL, peak before clipping: |
152 dB |
|
Output impedance: |
<200 ohm |
|
Cable drive capability: |
100 m (328 ft) |
|
Output balance principle: |
Impedance balancing with Active Drive |
|
Common Mode Rejection Ratio (CMRR): |
> 50 dB |
|
Power supply (for full specifications): |
48 V Phantom power (± 4 V) |
|
Current consumption: |
2.8 mA |
|
Color: |
Matte black |
|
Weight: |
58 g (2 oz) |
|
Diameter: |
19 mm (0.75 in) |
|
Capsule diameter: |
19 mm (0.75 in) |
|
Output voltage, RMS: |
> 5 V |
|
Microphone Length: |
64 mm (2.5 in) |
|
Polarity: |
+V at Pin 2 for positive sound pressure |
|
Connector: |
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
|
Relative Humidity (RH): |
Up to 90% |
|
Temperature range: |
-40 °C to 45 °C (-40 °F to 113 °F) |
|
Matching tolerance: |
± 1 dB |
|
Phase deviation for kit: |
< 10° |