|
Directional pattern
|
Cardioid
|
|
Principle of operation
|
Pressure gradient
|
|
Cartridge type
|
Pre-polarized condenser
|
|
Frequency response
|
20 Hz - 20 kHz
|
|
Effective frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in)
|
100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)
|
|
Sensitivity, nominal, ±3 dB at 1 kHz
|
6 mV/Pa; -44 dB re. 1 V/Pa
|
|
Equivalent noise level, A-weighted
|
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
|
|
Equivalent noise level, ITU-R BS.468-4
|
Typ. 38 dB (max. 40 dB)
|
|
Distortion, THD < 1% - Legacy
|
120 dB SPL RMS, 123 dB SPL peak
|
|
Distortion, THD < 1% - CORE
|
134 dB SPL RMS, 137 dB SPL peak
|
|
Dynamic range - Legacy
|
Typ. 97 dB
|
|
Dynamic range - CORE
|
Typ. 111 dB
|
|
Max. SPL, THD 10%
|
144 dB SPL peak
|
|
Rated output impedance
|
From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
|
|
Cable drive capability
|
Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
|
|
Output balance principle
|
Signal balanced with DAD6001-BC XLR Adapter
|
|
Common mode rejection ratio (CMRR)
|
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
|
|
Power supply (for full performance)
|
For wireless systems: Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
|
|
Current consumption
|
Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
|
|
Connector
|
MicroDot
|
|
Color
|
Black, beige or brown
|
|
Weight
|
Single Ear: 10 g (0.35 oz)
|
|
Microphone diameter
|
5.4 mm (0.21 in)
|
|
Microphone length
|
12.7 mm (0.5 in)
|
|
Cable length
|
1.25 m (4.1 ft)
|
|
Cable color
|
Black, beige or brown
|
|
Cable diameter
|
1.6 mm (0.06 in)
|
|
Polarity
|
Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001-BC XLR adapter)
|
|
Temperature range
|
-40°C to 45°C (-40°F to 113°F)
|
|
Relative humidity (RH)
|
Up to 90%
|
