The A-2000D Series is a range of high-performance mixer power amplifiers suited for broadcasting paging or background music in houses of worship, schools, offices, shops and factories. Equipped with balanced microphone inputs for better isolation from external noise, compared to unbalanced inputs, the A-2000D Series is suitable for AC operation and comes with power outputs from 30 W to 240 W. It is finished with a scratch and fingerprint-resistant surface for easy handling as well as quick volume control with master volume knob.

TOA A-2240 MIXER/POWER AMPLIFIER offers versatile features and outstanding value for installed sound applications such as schools, offices, restaurants, shops, factories, houses of worship and large meeting rooms. The A-2240 (240 W) is manufactured with proven TOA quality and reliability. Features include five inputs, two auxiliary (stereo summing) line inputs. two balanced microphone inputs and one telephone input. Mic 1 input provides 21V DC phantom power (switchable ON/OFF). Speaker outputs consist of 70.7 V, 25 V and 4 ohm. An auxiliary line output can be used for recording or connection to an external power amplifier. An Auto-Mute function provides voice-activated priority override for the Microphone and Telephone inputs which override the Auxiliary inputs. Auto-Mute sensitivity is adjustable for the Microphone and Telephone inputs. Other features include channel level, master volume controls and bass/treble controls. Suggested TOA Paging Microphones include PM-222U, PM-660U or PM-20EV The A-2240 is not rated for rack mounting applications.

FEATURES:

  • Wide range of power outputs from 30W to 240W
  • 3 microphone inputs, 2 AUX input and 1 recording output
  • Speaker output of constant voltage distribution system (100 V)
  • Independent tone control of boost and cut type for both high and low frequency.
  • MIC 1 with phantom power and mute function
  • Current limiter to prevent damage due to current overload.
  • Excess heat limit to protect the transistor and power transformer.
  • Finished with a scratch and fingerprint-resistant surface for easy handling.

Use MB25B (sold separately) for rack mounting.

    Note this is the new Class D model with the following differences over the analogue models.

    • VOX muting on mic 1
    • High (100V line) output only - no low impedance output
    • 240VAC operation only
    • 240W single zone mixer amplifier (Class D model)
    • 5 inputs; 3 mic (XLR) and 2-line level (RCA)
    • VOX muting on mic 1
    • High impedance (100V) output only
    • 240VAC operation
    • Use opti

    Specification

     

    Power Source

    220 - 240 V AC, 50 / 60 Hz

    Rated Output

    240W

    Power Consumption

    48 W

    Distortion

    Less than 1% at 1 kHz, 1/3 Rated Power

    Input

    MIC 1 – 3: -60 dBV, 600 Ω, balanced AUX 1, 2: -20 dBV, 10 kΩ, unbalanced, RCA Pin Jack

    AUX1, 2: -20 dB*, 10 kΩ, unbalanced, RCA Pin Jack

    Output

    High Impedance: 42 Ω (100 V)

    Speaker out: Balanced (_x001D_oating) / Rec out: 0 dB*, 600 Ω, unbalanced, RCA Pin Jack

    Phantom Power

    DC + 21V (MIC 1)

    S/N Ratio

    Over 60 dB

    Tone Control

    Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz

    Muting

    MIC1: Mutes other signals by 0 – 30 dB attenuation

    Indicator

    Power signal, peak

    Finish

    Panel: ABS resin black / Case: steel plate, black

    Dimensions

    420 (W) x 100.6 (H) x 280.3 (D) mm

    Weight

    4kg

    : A-2240D-AS