
DPA DP-4017B d:dicate Shotgun Mic
DPA Microphones DP-4017B
Shotgun Microphones
DPA Microphones DP-4017B
Shotgun Microphones
Features
Designed for a broad range of applications, the d: dicate™ 4017 Shotgun Mic is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast / ENG / film booming and even studio recording environments.
This condenser microphone capsule is part of the flexible d:dicate™ Recording Microphones Series. It is equipped with a highly directional hypercardioid pickup pattern; obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection.
Technical Specifications
Brands |
DPA Microphones |
Microphone Type |
Shotgun Microphones |
Series |
d: dicate |
Specifications
Directional characteristics: |
Supercardioid, lobe-shaped |
Principle of operation: |
Pressure gradient, with interference tube |
Cartridge type: |
Pre-polarized condenser |
Frequency range: |
20 Hz to 20 kHz |
Frequency range, ± 2 dB: |
70 Hz to 20 kHz, permanent third order high pass filter at 50 Hz |
Sensitivity, nominal ± 2 dB at 1 kHz: |
19 mV/Pa; -34.4 dB re. 1 V/Pa |
Equivalent noise level, A-weighted: |
Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A)) |
Equivalent noise level, ITU-R BS.468-4: |
Typ. 25 dB (max. 26 dB) |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 80 dB(A) |
Total Harmonic Distortion (THD): |
< 1 % up to 133 dB SPL peak |
Dynamic range: |
Typ. 119 dB |
Max. SPL, peak before clipping: |
138 dB |
Filters: |
High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz |
Output impedance: |
< 150 ohms |
Cable drive capability: |
100 m (328 ft) |
Output balance principle: |
Signal balanced |
Common Mode Rejection Ratio (CMRR): |
> 40 dB |
Power supply: |
48 V Phantom power (± 4 V) |
Current consumption: |
4.5 mA |
Connector: |
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal – phase |
Color: |
Matte black |
Weight: |
68 g (2.4 oz) |
Microphone diameter: |
19 mm (0.75 in) |
Capsule diameter: |
19 mm (0.75 in) |
Microphone length: |
212 mm (8.3 in) |
Output voltage, RMS: |
> 1.8 V |
Polarity: |
+V at Pin 2 for positive sound pressure |
Temperature range: |
-40 °C to 45 °C (14 °F to 113 °F) |
Relative Humidity (RH): |
Up to 90 % |