SOUND PRESSURE LEVEL (SPL)

·         Loud SPL (6061/4061/4161/4661)

AMPLIFIER TECHNOLOGY

·         CORE by DPA

COLOR

·         White

TERMINATION

·         MicroDot (for use with detachable connectors)

WIRED OR WIRELESS

·         Microdot Only

ACCESSORIES

·         High-boost grid

·         Soft-boost grid
Big sound - small footprint

·         Exceptional audio quality

·         Uniform, consistent sound between DPA mics.

·         Extremely rugged and reliable

·         Diminutive size made for flexible and easy concealment.

·         Large selection of clips, windscreens, grids, and other accessories

·         Modular adapter system fits most professional wireless systems.

This series contains the 4060, 4061, 4062, 4063 and 4071 Omni Miniature Mics. Each version is tailored towards a specific application based on sensitivity, voltage, and placement needs. They are all based on the original d:screet™ 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All the mics in the series share important basic features, but each is optimized for particular applications.

The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments.

d:screet™ 4061 Miniature Omnidirectional Microphone, High SPL
This microphone is acoustically identical to the d:screet™ 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs).

The d:screet™ 4061 Miniature Omnidirectional Microphone, High SPL can handle SPL up to 144 dB peak before clipping, making it one of the best miniatures for use on very loud sound sources, such as some instruments and human voices.

In comparison, the d:screet™ 4061 is about 10 dB less sensitive than the d:screet™ 4060 and therefore works well when used for hidden applications, for example mounted on the head or forehead of a theater performer. In this placement, the sound pressure level is about 10 dB louder than what you encounter with chest placement (lapel microphone).

This mic is available in four colors: black, brown, beige, and white. An even more robust, heavy-duty version is also available.

Technical Specifications

Brands

DPA Microphones

Microphone Type

Lavalier Microphones

Series

4061

SPECIFICATIONS

·         Directional pattern: Omnidirectional

·         Principle of operation: Pressure

·         Cartridge type: Pre-polarized condenser

·         Frequency range: 20 Hz - 20 kHz

·         Frequency range, ±2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz

·         Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa

·         Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))

·         Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)

·         S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)

·         Total harmonic distortion (THD) - Legacy: < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine

·         Total harmonic distortion (THD) - CORE: < 1% THD up to 137 dB SPL peak

·         Dynamic range - Legacy: Typ. 97 dB

·         Dynamic range - CORE: Typ. 111 dB

·         Max. SPL, peak before clipping: 144 dB.

·         Output impedance: 30 - 40 Ω.

·         Cable drive capability: Up to 300 m (984 ft)

·         Power supply (for full performance): For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance

·         Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter

·         Connector: MicroDot

·         Color: Black, beige, brown or white

·         Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector

·         Microphone diameter: 5.4 mm (0.21 in)

·         Microphone length: 12.7 mm (0.5 in)

·         Cable length: 1.8 m (5.9 ft)

·         Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin

·         Temperature range: -40°C to 45°C (-40°F to 113°F)

·         Relative humidity (RH): Up to 90%

: DP-4061-OC-C-W00

You might also like